4.8
From 1
to 5
Reviews
4722
Recommend
10 / 10
TrustScore
9.7 / 10
John Daly
Verified Buyer
Rifle Barrel 3/8 Dovetail Sight Filler Blanks
A perfect fit, no adjustments needed at all. Checked the fit, degreased the part and dovetail, painted it with a little red Loctite and done. Looks far better than the old style fillers with the large flat on top of them. Another great offering from Ranger Point.
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
This gate works awesome. As navajo stated above, you really have to try it to appreciate it. I tested it in my 444 and it was effortless loading which is a welcome change with the 7 round extended mag tube. I then put it in my 2006 336 MXLR 30-30 and again, what a difference! If you can describe feeding a side gate mag tube gun as "butter smooth" then this is it. Doesn't even seem like the same rifle anymore. When first installed, I loaded and cycled it 20 times repetitively, that's 100 rds, and my thumb didn't feel any different stuffing #100 in then it did the first round. I left it in the MXLR because I'm really digging the two tone look as well. I'll be upgrading most of the "fleet" with more of these.
Vt4ster
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
My order came to VT yesterday. I got a black "blue" and a gold or brass colored. I installed the gold one as I had installed a gold trigger in my 450M. Great products works as described and will be ordering in bulk for my go to shooter 1894 and 1895's. Thanks Adam nice to unload through the gate.
JC1957
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
Got it..,it's installed. And it absolutely makes it much easier to load bullets into the tube. An Excellent option for your rifle.
Maineiac
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
I installed my new loading gate in my 336SS. Installation was a snap and the new gate works great. The new loading gate is now also installed and working in my 1953 336SC. I ended up filing the boss to 0.0740 to provide the clearance for the carrier to slide by the boss on the gate. Two RPP Fly Weight Loading Gates installed and looking pretty:
SettingSun
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
Totally worth the money. Got one for a 1895CB. Shipped on Tuesday after Memorial Day and received on Friday, only because I live in the boondocks or would have been a day sooner. Now. I can't unload it as fast as Navajo on the video but it is easy and no pinched fingers! Great job!
bmp4510
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
I ordered one for my 1895 SBL. Tremendous difference with the new gate compared to the old. The OEM gate was a finger pinching, fingernail grabbing son of a gun. I truly hated it. The RPP fit perfectly, and now loading the rifle is a pleasure. The color of the stainless gate is slightly different than the receiver, but the functionality greatly outweighs color. I also had been waiting for the gate release to purchase the Quick Takedown Screw for my lever. The screw is beautiful, fit perfectly and matched the color of the receiver.
I ordered both parts the day the gate release was announced, and was shocked to have it at my door 3 days later. I am very impressed with RPP.
I ordered both parts the day the gate release was announced, and was shocked to have it at my door 3 days later. I am very impressed with RPP.
Happy Customer
Verified Buyer
Marlin & Henry Lever Rifle Peep Sights | Cloverleaf + Green Fiber Optic
Installed my new stainless steel cloverleaf sight on the 336SS today. They arrived yesterday, quickly, considering they were ordered on a holiday weekend. As expected, the machining is very well done. What I find impressive, is the cloverleaf idea. It lets a lot of light in, yet the cloverleaf becomes almost invisible, while the edges look like horizontal and vertical hash marks on a scope, for fast, precision centering of the front sight. Really cool!
John
Verified Buyer
Marlin & Henry Lever Rifle Peep Sights | Cloverleaf + Green Fiber Optic
The Cloverleaf sight landed at my door 20 minutes ago, and a day ahead of schedule at that! First impression is a very well machined piece of work. After putting it on my 1894FG, it is very much lower than the Skinner set that was there earlier. So much lower that I am going to have to order a dovetail filler for the rear sight. I can't see through with the new sight! I think this is going to work well with the original front sight. The Cloverleaf design is different, I like it, just going to take a little getting used too. Very open. Easy to pick up. Adam, another nice design, well done.
Dave Berry
Verified Buyer
Marlin Lever Medium Large Loops | Black Nitride Steel
Fast shipment, and great looking loop...not outlandishly large like my other one, just right in size. Installed easily, I had hoped the loop plunger and spring I ordered would be installed when it arrived, and I think you should offer that option, as I did not want to take my old one out of my OEM loop. Installed worked perfectly, no fitting, and after opening and closing a dozen times, broke in!!
Sam
Verified Buyer
Had to clean the threads out some small chips where left in the if threads and whatever locktite you put on there was dry and brittle. Overall Im pleased
Michael Crosby
Verified Buyer
Awesome barrel. Just a bit snappier then the 40 barrel but oh so fun to shoot. Just added the spring to the extractor so now all that is required to change from 40 to .357 sig (and back) is a barrel swap.
Dan Ellis
Verified Buyer
Everything went together easily. Parts are all well machined. Well worth the money!
Tom
Verified Buyer
Marlin Rossi 95 Aluminum Magazine Followers, Self Cleaning
Great fit, easy install, works REALLY well!
This is a definite improvement over the stock follower. This should be an OEM part from the factory.
The self-cleaning groves are simply brilliant and necessary.
This is a definite improvement over the stock follower. This should be an OEM part from the factory.
The self-cleaning groves are simply brilliant and necessary.
Kevin
Verified Buyer
Marlin Lever Medium Large Loops | Black Nitride Steel
Your lever and extractor were purchased for a previously owned .41 Mag Model 1894 Cowboy Carbine Limited that was in like new condition. The lever (including shims) installed easily and worked perfectly with no modification. The rifle has NO rattles now like it did before I installed it, and the lever is a thing of beauty to behold.
The extractor installed relatively easily and works great. It too is a big improvement.
I want to also thank you for your great website with plenty of information on your products, links to how-to videos and a very helpful ordering form. Thx!
The extractor installed relatively easily and works great. It too is a big improvement.
I want to also thank you for your great website with plenty of information on your products, links to how-to videos and a very helpful ordering form. Thx!
Dan Clements
Verified Buyer
RHINO 5" Picatinny Rail Scope Mounts | Marlin Henry Rossi 95 Rifles Scope Mount
This has been Rock Solid on my Marlin 45-70. Great Rail!
AKB
Verified Buyer
Easy upgrade. Well made. I highly recommend.
High Spade Mikey Wilson
Verified Buyer
A couple of months back I took the plunge to update my Marlin 1894CS in 357 mag. First I installed the Ranger Point Extractor and immediatly felt a difference when I cycled it. Then I cleaned out the mag tube, shortened the mag spring, and installed a new stainless steel follower. Today I shot my first match with it. What a JOY I had shooting it. It never ran so smooth, and the extractor worked like a charm! I would highly recommend to anyone who has a Marlin 1894 to replace that bobby pin extractor with this Ranger Point Extractor. IMO you cannot go wrong.
Dave
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
What a difference in loading! Butter smooth and effortless compared to the OEM gate. No more sore thumb or gouged thumb nail!
Navajo
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
These are well worth the price. Smooth as glass and saves the hassle of modifying an original. In all honesty, an original gate can never be made to be this slick.The part I love about these, is that with a simple press-in on the new gate, you can quickly and almost effortlessly unload cartridges from there. See the video.
Top Rated Products
|
Marlin Lever Medium Large... |
|
|
Henry M-LOK Handguard (Bl... |
|
|
Marlin Lever Action Loadi... |
|
Facebook
RaveCapture Commitment
RaveCapture is a review and reputation management company that collects and displays 100% verified buyer reviews. We take authenticity very seriously, which is why we're the only review service that only allow reviews from verified paying customers. No fakes, no nonsense... just real reviews. That's our promise.
The RaveCapture Triple Guarantee
- RaveCapture Companies Are Held Accountable
- All Reviews Are Verified Customers
- Negative Reviews Can Never Be Deleted
