A little pricy. I will know more once i put it in and actually hear the difference.

Great stuff

Some negatives: has slight smell; quality of foam bonding is not perfect; foam is not as temperature tolerant as the overkill pro. Positives: it’s ready to go without gluing it yourself.

High quality sound deadening, easy to install. Made a huge difference in my old school truck

Looks good quality. Yet to install and therefore will give more feedback once installed.

Having committed to having the materials shipped to Thailand was concerned if this was all going to be worth while. The products arrived swiftly and was delighted with all of them. The car as been greatly improved at least a 25% noise reduction achieved. Would not hesitate to recommend second skin Staff and products.

My 42 year old truck was very loud and the doors had a really hollow sound when closed. After second skin, I I can now have a conversation that doesn’t involve yelling and the doors sound link a bank vault. Highly recommend this to anyone

Awesome!!!! Just amazing......I would recommend this product to anyone or anybody who wants to sound proof their vehicle(s).

Good kit, plenty of material for my 73 C10 single cab. Night and day difference!

Spray Gun was easy to use. Cleaned spray nozzle out with water hose in between coats and had no issues. Wish I would have bought an extra bottle for my large project, would have made it easier to spray more area per coat.

good

Sorry this product doesn’t work at all. Nice manufacturing though.

Very satisfied, have used this product for years. Work great in hot rods for sound and heat.

This is a great way to see and feel the product before you purchase... thanks!

Best in the game very afordable

MY TACOMA GETTING READY TO GET A SECOND SKIN!! SECOND SKIN IS THE BEST SOUND DEADENER ON THE MARKET PERIOD...I WOULD NEVER EVER USE ANYTHING ELSE!!!!

Why did you buy our product?:
Car Audio

This is a project that I have researched for about 2 years and not satisfied with the options that I found until I found Second Skin. I called and explained what I have and what I was looking to achieve. Without hesitation from the sales department, they recommended the Damplifier Pro, Heat Wave Pro spray adhesive and the wooden roller applier. I then needed to figure out how much of each product I needed. I called back and was given the best option that met my needs. The product arrived ahead of what I was told, which was ok as I was vacationing in Hawaii. I came back and prepped the engine housing. This took approximately 5 hours. I used an adhesive remover, which took a long time and ended up using a disc sander. Got great results as you can see in the pictures. Final clean before applying the Damplifier Pro was to use denatured alcohol. I was now ready to apply the Damplifier Pro. I placed this product out in the sun for about 10 minutes. This allowed the Damplifier Pro to become much more pliable to cut and place for the installation. I was told to be careful as the product can be sharp. As I continued, this product went on very easy. Just make sure when you place the Damplifier Pro, it's where you want it to go. It is not very forgiving if you need to remove and replace. Getting back to the sharpness, yes, it's like getting a paper cut only worse as it made me bleed. So please use extreme caution when applying this product or wear some sort of glove. Lesson learned. This product looked awesome once applied. I then sealed the seams with HVAC tape. Once this was done, the next step was to install the Heat Wave Pro. I measured 3 times to get the most mileage of the product with minimal waste. Once I figured that out, the cutting began, I started with the largest and flattest piece and continued from there. To apply the Heat Wave Pro, I used the adhesive spray that I purchased. As you can see again from the pictures, the finished project looks awesome. I again sealed all seams wit the HVAC tape. If I had to give you a time frame from start to finish, I would estimate 10 hours. But now that I know what I'm doing, minus the prep, I could do my project in under 2 hours.

I have yet to put the boat in the water, but I am very anxious to hear the results as an inboard tournament ski boat can be noisy.

If I need to give pros and cons, the pros are easy to install, cons (Not that this is a con, but more user error) would be to watch the sharp edges on the Damplifier Pro.

I would highly recommend this product/company to anyone who needs this type of product.

Why did you buy our product?:
Heat Insulation

Image 1 caption:
2001 MasterCraft ProStar 209 Tournament Ski Boat

Image 2 caption:
Engine housing cover with old foam crumbling off

Image 3 caption:
Cleaning and all prep completed ready to to apply Damplifier Pro. Used denatured alcohol to clean

Image 4 caption:
Damplifier Pro installed

Image 5 caption:
2nd picture of Damplifier Pro installed

Image 6 caption:
Sealed all seams with HVAC tape

Image 7 caption:
2nd picture of sealed seams with HAVC tape

Image 8 caption:
Heat Wave Pro applied using aerosol adhesive and sealed all seams with HVAC tape

Image 9 caption:
2nd picture of Heat Wave Pro sealed with HVAC tape.

Image 10 caption:
Another picture of 2001 MasterCraft ProStar 209

Decided to see if I could quiet down the obnoxiously loud flasher relays in my s10 blazer. What a difference! One small strip around each one and it drastically changed the sound. The metal relay was cut down my about 60% along with the annoying high pitched "ting" and the plastic relay was cut down by about 40%.

Sink is extremely quiet with the Damplifier Pro.

We always buy your products awesome stuff. Have multiple cars used on floor and trunk.