4.8
From 1
to 5
Reviews
12162
Recommend
10 / 10
TrustScore
9.7 / 10
DP
Verified Buyer
I have a C9 and an S9 and I've been really happy with this barrel in both guns. It fits great, you can feel that it's a tighter lockup and more precise fit. Seemed at least as accurate as the stock barrel, but the C9 and S9 are very accurate pistols to begin with. The brass weight makes a little difference -- since it's the smallest weight it's not obvious, but if you're concentrating on it you'll notice a little less flip.
Only took off a star because my barrel was full of sand from the finishing process and took me a while to get it fully cleaned out. I'm sure this wasn't typical.
I do highly recommend this if you enjoy shooting suppressed.
Only took off a star because my barrel was full of sand from the finishing process and took me a while to get it fully cleaned out. I'm sure this wasn't typical.
I do highly recommend this if you enjoy shooting suppressed.
Shawn Sullivan
Verified Buyer
Didnt feel much of a difference from the stock guide rod other than the weight felt slightly better but knowing that it will hold up better over time and Heat is comforting. Well made product.
Stuart Wald
Verified Buyer
I've got a late 2014 or early 2015 Marlin 1894 44 mag. that had a lever jamming problem when the gun was empty and when either any left pressure was put on the lever when cycling or cycling the lever with the gun held with the left side down. Maybe not a problem for most, but I didn't like it. I saw on YouTube where a person had a similar problem and sent the gun back to the factory for repair and it was returned with the same problem. I figured maybe limiting the movement of the lever to the left might help. I ordered a set of the lever shims and installed both of them on the left side of the lever and it worked like a charm. No more jamming. It also took some movement out of the lever as designed. Great product!
Steve Wendover
Verified Buyer
Marlin and Rossi 95 Hammer Ext BLACK (Cross-Bolt Safety)
Good fit, and the checkering is deep enough that it should hold most kinds of gloves securely. Scary when yer thumb slips off; not gonna happen again!
Scott
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
Easy swap, no fitting necessary. Easy to follow instructions, great improvement.
Gary kempf
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
I've bought 3 of these levers and I love them. Perfect drop in fit every time and the perfect size. I will be buying more of these.
Mike Peregrim
Verified Buyer
Marlin Lever Quick Takedown Screw | RP Logo Black Nitride
Well made, and works very well, perfect size to get the needed grip to tighten and loosen by hand, but small enough that it won't get in the way. I also like that all the edges are rounded so it won't snag on clothing while walking, something us lefties know all to well.
Russell
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
Thank you for the prompt delivery of the Marlin loading gate. The install went quick and easy, thanks to your video. Your gate makes a huge difference in using the rifle.
Anthony
Verified Buyer
Marlin and Rossi 95 Hammer Ext BLACK (Cross-Bolt Safety)
Perfect fit and function. Highly recommend it. 336 Marlin 1950's hammer extension spur.
Trent
Verified Buyer
Marlin Rossi 95 45-70 govt mag tube follower
Product is well made and light. Anodizing is solid. The flutes look to help keep follower from binding up with grit. Has worked well so far.
Anthony Iusi
Verified Buyer
Marlin and Rossi 95 Hammer Ext BLACK (Cross-Bolt Safety)
Easy and perfect fit. High quality. Perfectly functional.
Robert G
Verified Buyer
Tell us about your experience
It works pretty good. I had to do a little fitting on it to work right in my marlin 1894 44 mag. In my marlin 357 it was a drop-in. Seems to eject around the 2 o’clock position. Money well spent.
Mike Peregrim
Verified Buyer
So the product itself is great, and really nice job, however for older rifles, a $9.00 two pack isn't enough. I've used 2 sets so far, and could likely use a 3rd, but for now it's still a drastic improvement over what it was before.
So that said, great product, but if there is more than a little play you might need a few sets, and that can get costly.
So that said, great product, but if there is more than a little play you might need a few sets, and that can get costly.
Ernie
Verified Buyer
Rifle Dovetail Sight Filler Blank (black nitride coated)
Bought this for a Marlin with XS Sights. Knocked out the ugly filler I had installed to replace the OEM rear sight. This part just slide right in as advertised. My rifle required no fitting. Follow the instructions provided and use red loctite. This dovetail filler is very cosmetically appealing. Thanks RRP,
Ernie
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
Installed the new loop lever. No fitting was required on my JM manufactured Marlin 336. Love the fit and feel of the new lever. Great product. Thanks.
Bob Aguiar
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
Very easy to install. Perfect fit. Would highly recommend to anyone interested in doing this retrofit.
Ernie
Verified Buyer
Marlin Lever Action Loading Gate - Flyweight Fast, Easy, Smooth
Product was easy to install. Makes a big difference for loading rounds compared to the factory part. Thanks RRP.
Doug Ramey
Verified Buyer
Marlin Lever Quick Takedown Screw | RP Logo Black Nitride
I was concerned it might be kind of clunky looking, but when I got it installed, it was very un-obtrusive. It works smoothly and quickly for the designed purpose, no tool takedown.
donald t
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
Tell us about your experience
Fast shipping great products
Scott
Verified Buyer
Marlin 1894 Lever Loop Straight Grip Stock | Medium Loop (black)
So far I really like this new lever. The look and feel of it cycling is a huge improvement over the original lever. Installation was easy and the instructions were clear. I haven't had a chance to fire the rifle yet, but I expect it to work fine.
About Ranger Point Precision
Located in the Houston area in Cypress, TX, Ranger Point Precision (RPP) is the leading innovator and producer of quality aftermarket lever-action rifle parts.
Visit Website
Ranger Point Precision is a Verified Merchant
Top Rated Products
|
Marlin 1894 Lever Loop St... |
|
|
Henry X Models Ranger Poi... |
|
|
Henry x Rifle Trigger Kit |
|
Facebook
RaveCapture Commitment
RaveCapture transforms how businesses collect and showcase customer experiences. We take authenticity seriously and only allow 100% verified buyer reviews and UGC.
Guarantee
- RaveCapture Companies Are Held Accountable
- All Reviews Are Verified Customers
- Negative Reviews Can Never Be Deleted
With RaveCapture, you’re not just managing a reputation — you’re sharing the voice of your raving fans.
