Marlin large loop lever.

This is by far the best rail I've had my hands on for converting my Marlin 1894's weaver rail to a picatinny rail. The service was great and shipment was fast.

The Marlin 336 scope mount base is very precision and the 10 moa required no shimming, which I have always had to do trapdoor level loads. The same base made for the Rem 742/740/760 type guns would be equally useful if you don't already have one. Very satisfied.

I just finished mounting the Rhino scope rail on one of my 336 Marlins. It allowed me more adjustment fore and aft than the previous Weaver mount. I moved the scope forward about 1/2" from its previous location. It is now right in its "sweet spot". I'm toying with going with an illuminated hog scope on it, after deer season.

I own a Springfield Armory Omega 1911 (RPP 10mm Guide Rod). This weapon is 28 years old and I can no longer get parts for it. I broke the guide rod. Crushed and defeated after looking on the Web calling on every lead I could get. Nothing available. I called Ranger Point and told them what I had and immediately felt secure that these guys knew what the are talking about. I put it in their hands and a few short weeks later my weapon was alive again. Rebuilt and stronger than before after being turned away from several shops. Ranger Point succeeded in becoming my go to guys for whatever I'll need in the future. Ranger Point had it done and back in my hands, better than new in a few weeks. Can't stress enough how happy I am with their service, quality and professional work. One very Happy Customer. Highly recommend. You can't go wrong with this guide rod!

I installed the RPP M/94 extractor claw into my 1980 Marlin 1894 .357 that had the old style spring steel extractor. Installation was a breeze (after cleaning the crud out of the hole!). Action cycled fine so next step was to get to the range. I also brought my tool kit and my 1995 44 mag rifle so I could install it in that rifle while at the range.

I set up at 50 yards and had 150 rds of PMC .357 and 50 rds of PMC 38spl. I tried the 38spl first, loaded up 5 rounds and chambered the first one without a hitch. This rifle is usually fussy about shooting 38's. Shot the 5 rds without a problem, loaded again, and no problems. Shot the whole box and cycled perfect, neatly tossing the empties at 2 o'clock. I went to the .357 next and had zero issues with those. I shot strings a bit slower as the barrel was getting quite hot but it had zero functioning issues. The action feels like it cycles a bit smoother while feeding and like it did with the 38spl, it put all empties in a nice pile at 2 o'clock. No matter how slow/easy or hard/fast I cycled it, the empties always went at 2 o'clock. Makes it real easy to pick up brass when it's in a neat pile. I shot off bags for most of the session so I was able to keep my brass landing right on the bench by cycling it "softly.

Once I used up my ammo I took it apart and removed the RPP extractor and sadly re-installed the spring steel stock one. Then I pulled the bolt from the 44 mag, popped out the old extractor and installed the RPP, right there on the shooting bench. Installation was again very quick and easy. After putting the rifle together I got my 44 ammo out and got to work.

The ammo I used for the Marlin 44 mag testing were all reloads from February 1999, 100 of them. I had a pile of 44 mag ammo from 1999 but I'm finally down to my last 4 boxes so I grabbed two for this test run. I loaded up 5 rds, first one fed easily, shot and extracted easily as did the remaining rounds. I noticed during the first 5 shots that I was getting the same ejection of the empties as I had with the .357, all tossed at 2 o'clock. Neither one of these rifles used to do that. I shot the first box of 50 without a hitch, let it cool for a bit while some fellow shooters showed up and got set up. Once shooting resumed, I put the remaining 50 through it without issue. It felt like it cycles smoother than it used to, and did I mention it tosses the empties neatly at 2 c'clock?

I can't wait to get some of these for all my 94's once they get them rolling out. I plan to equip all 5 of my 1894's with this new claw! Big Thank You to Adam/RPP! I'm sold.

Marlin 336xlr sighted in at 200 yards MOA. Ranger Point medium loop lever, hand made and tooled butt stock and shoulder strap.

Using a William's FP rear sight, I no longer need the factory sight but I hate the unfinished look of an empty dovetail slot. Other companies make fillers that just look like blocks of metal stuck to the top of the barrel. This one is by far more attractive and easy to install. 2 drops of red loctite and it slides right in and stays put. Bluing matches my barrel perfectly and gives the rifle a very clean look. 5 stars all the way.

So, I think I must have a newer design of feed ramp on my Marlin (It is new) and the ramp is a bit stiff, but it was getting easier, or I was getting used to it. The Ranger Gate needed a tiny bit of fitting as it was snagging on the receiver (Marlin machine burrs), and is lighter and easier to use, but not as much as I thought it would be. I am keeping it in there but I think it needs a bit of break in, especially on the inside face where it needs to run across the loaded round rim. It's a bit sticky there.

If you are on the fence about purchasing Ranger Point's guide rod do yourself a favor, buy one. Your Steyr will love you for it. I ordered mine and received it here in PA in 3 days. Ranger Point was great in it's delivery. It is easy to install, I just cleaned the threads with a little IPA and used some loctite and let sit for 24 hours. I have since run 400 rounds through my M9 with it's new guide rod with no problems...none ! This is the guide rod this pistol should come with and I think it looks and performs better then the polymer factory one. It is a definite upgrade and IMHO should be the first upgrade anyone does to their Steyr pistol. Ranger Point has been great all the way !

I was skeptical of any improvements or benefits to be gained from these things that being said! Dudes and Dudettes if you own a Steyr L, M, C, or S RUN! don't walk to Ranger Point and grab the steel guide rod / brass weight combo pack they have at a great price and install it. Do your own before and after shot assessment. When you're done come back and write a review on how truly awesome this "bit of kit” truly is. Listen I love this company. I love their products 'nuff said!

Shims worked well at removing the slight sideplay when working the lever. Easy install-I used one shim on each gun, and put it on the pivot point on the lever that showed the most wear. A little oil and it smooth the lever throw nicely-would recommend-

I purchased 2 of the medium loops for my Marlin's. I have 1 already on a custom rifle that they built for me and really enjoyed it and I purchased 2 new Marlin's and had to have the loops. Easy to install and the shims worked as promise to get rid of the slack in the lever when it is in the open position. They treat you like family when dealing with them at Ranger Point Precision. Can't go wrong with Adam, Kim and the others.

I like the one I installed on my 1895 45/70 so much I got one for the 1894 in 44 Mag. Same good quality, flawless function, and good looks! But where I used the video to install the first one, I put this one in by memory in half the time! Great update! Really pretty simple! Very pleased-would recommend-

Great customer service, installed lever easily.

The improvement in loading and unloading is worth twice the price.

This is easily the best upgrade I could have made to my rifle. The feel, function, and flow are all improved with this simple upgrade. Do yourself a favor and grab one today.

Great after market update! Easy installation, make sure to clean the hole well after sliding the old spring type out, then keep as much of the plastic sleeve on this as you can while sliding it in-it helps keep the coil spring from humping out of the slot! Works great at grabbing the case rim without marring it, and the rifle cycles very smoothly when feeding and extracting. Will probably get one for my 1895 in 45/70 as soon as I pay off a new set of truck tires! GREAT customer service!!!

Excellent! Easy and quick installation, the online video lays it all out, and the only problem I had was getting the buttstock off because Marlin fitted it so well! Works just as advertised, and the unloading feature is great! Like it so much I have one coming for an 1894 model in 44 Mag-

Quality product. Fits great!