My PC Tower started to vibrate and cause loud annoying noises. I found an online forum where people were using butyl dampeners to stop the vibration noise caused by the PC and fans. After some research I found this highly rated company and they had the most affordable small package around. Fixed all the annoying noise/rattles in the tower for only $20 with 4 of these mini tiles cut up and spread out on each tower wall. Great product guys!

I ordered Second Skin to line the interior doors behind the door cards, firewall and floor area to reduce vibration, engine and road noise. It's an amazing product which resulted in a significantly quieter interior and doors that shut soundly. Big thumbs up.

I used a lot of your products in the build and it worked out unbelievable ! Did a rotisserie restoration on an RSR style Porsche and we wanted maximum comfort and sound deadening, Second Skin Rocks!!
Installed Damplifier pro and then Heatwave Pro over that on the inner roof
Damplifier Pro in the doors with Overkill over that
Damplifier Pro on floors with Luxury Liner Pro on top of that.
We only used 40% Damplifier Pro on the areas that we did use it and the car was super quiet.

I use the mass loaded vinyl luxury liner pro in wheel wells to block out the tire, brake, and road noise in my vehicles. This is the 3rd vehicle I have done this to and it works very well. I would recommend this approach to anyone with load tires or road noise issues.

Product worked great. Easy to install with great heat protection.

I was recommended second skin by my good friend jeffrey hald. After receiving the product I was very satisfied with the quality of the deadener. We deadened the trunk lid. Both sides of the rear deck. The rear quarters and the licence plate. I am extremely happy with second skin and will continue to be a customer. There is minimal rattles after deadening. But it has gave alot of flex to the roof of the accord. So if I win I plan to turn around and use the money to purchase more deadener so I can do the roof. Lol.

I travel full time with my dog Chaco on a motorcycle sidecar rig. His sidecar is made of fiberglass and I was looking for options to reduce road noise and increase insulation. A fellow sidecar-dog friend had used Second Skin Audio products. Peel and stick installation was easy. The result was fantastic. Reduced noise and vibration, increased insulation in hot and cold conditions. Recommend to all my fellow sidecar friends!

Second skin has always taken care of me on all of my automotive sound deadening needs. This is yet another example.

I was concerned with my paint longevity from heat and I had concerns about engine noise when I was doing some more spirited driving. Eric recommended that I use some Damplifier pro and his new product Mega block to tackle this project.

The mega block product was super easy to use. It cuts like a dream with a fresh razor blade and the adhesive is seriously impressive. Be careful, it sticks to fingers really well also.

The results were exactly what I was looking for. My engine noise was reduced and my hood temperature dropped dramatically regardless if it was just sitting in the sun or after my drive home.

As always. Great products and customer service second skin.

Great product! Mil thickness is top notch, sticks very well to all surfaces and excels in sound absorption. I love this product!!

Spectrum lays down really nicely, currently working on lining the entire cab with luxury liner pro. Shipping was fast, service has been top notch.

i was looking for a way to better direct sound out of my dash panels and Eric reccomended his mega zorbe product.

The most impressive part of this product was the adhesive. I will never have a concern about the adhesive failing that is for sure.

I cut shapes that would fit into my dash and stacked it 4 times so I had 2" of material. I then installed these blocks behind my midrange speaker in my dash to absorb the rear wave and help better the phasing of my entire system.

Then I cut out my own version of a "Fast ring" to better direct the sound out of the speaker grills. Followed by wrapping the grills in speaker grill cloth.

These steps gave me the exact result I was looking for in my sound quality build and I hope it gets me the extra point or two at finals this year.

Thanks second skin, for another great product.

Love the product top shelf

Took 2 of us approximately 13 total hours of slow steady work. But very rewarding and fun.

Real good product indeed - some of the best in the industry.

I applied 5 layers of Spectrum on the under body this 1967 Camaro, it took about 4 gallons of the 5 gallon I bought. Sprayed on easy, very little over spray. The sound difference afterwards was very shocking, I was surprised with how well it lowered my transmission and exhaust noise. It is much better to talk on the phone while driving now. The look of the Spectrum after curing is nice. I would recommend this product to anyone looking to lower the sound from an old muscle car.

I love Damplifer Pro, it smells great, easy to apply, so smooth laying down, it's the best deadener on the market, I've had my 1999 Toyota 4Runner deadened since 2014, it's helped me win many titles and has saved my truck from total destruction from over 150 DB low frequencies while flexing, floating, hair, bottles & cans, it helps my system perform in the lanes and when I give demos, good deadener is the unseen hero in an audio system-Master Will

Hands down the best deadener on the market. Plus it's all made in the U.S.A.

On this project my goal was to keep the engine bay cool while parked and also reduce the driving temp with heat deflection. I chose to use Spectrum liquid sound deadening to reinforce the flimsy hood and help block the sun from beating through to the engine bay. I applied 4 layers for a nice thick coating about 3mm total. I am so glad I used the wire tape and pre-taped plastic roll, it made prep work easy and removal was very quick, just un-taped and rolled up all the plastic into a big ball. After waiting 24 hours for the Spectrum to get a fuller cure, I applied a primer to the Spectrum so the glue had a nice solid foundation. I traced out the factory hood material onto the Mega Zorbe and then cut out the pattern, it fit perfectly onto one 8 sqft sheet. I then got someone to help me peel and apply the Mega Zorbe to the hood, with one nice push from top to bottom, it stuck on perfectly. We then pushed the product on tight with a wooden roller, hands, and knuckles. (Afterward the pictures, I went to Auto Zone and got the replacement factory hood material clips just to be sure and give it that factory look.) Product looks great and seems to work amazing. The only temp I can record is the standing temperature after sitting in my parking lot at work all day in the direct sun light. Before product my engine bay temp started off at an average of 105 degrees throughout the week tested. After product (and it has been hot this week, well above 110 outside) the starting temp of my engine bay has average 98-99 degrees. I can't record the temp while driving scientifically but my a/c gets cold very quick now and and I have to set my temperature level down one notch from 4 to 3 on my long rides home. I would say this upgrade was well worth the time and money, living in the desert is hot. And any little help with heat protection goes a long ways. Very satisfied with my Spectrum/Mega Block purchase and install.

Did the entire car no rattles dosent get mushy from being in the sun great product makes everything sounds better clean

I love spectrum it lays down perfect with the spectrum spray gun. I like spectrum better then damplifer because it is easier to get 100% coverage in hard to reach areas, and cleans up with water if you have overspray.